Something is thrilling about painting on a skateboard, too. You’d like to learn how. Moreover, it is also a fantastic summer project idea that will give your deck a stylish look and make it unique. Everyone can participate in creative projects out there, even if you don’t have any artistic talent. Beginners like you can benefit from all-inclusive kits despite their lack of skills and still play without breaking the bank. We know what they did well because these boards looked great when they were done. Consequently, you can paint over those old, boring logos from last year or add design elements for a total price. It may cost $100+ to paint a custom board.
List of items required
Table of Contents
- Skateboard deck without graphics
- Paper or cardstock
- Frisked to make stencils
- Acrylic or spray paint
- Painting brushes
- A mask to cover the nose and mouth
- Varnish for sealing designs
- Reusable gloves
- RED tape
- Surface protectors
- (Either an apron or old clothes)
- Covered area for spray painting
- Mounting boards
1st Step: What’s the working area like?
You can get sick from painting a Board. If possible, you should seek out some well-ventilated areas outside. You might end up splattering paint everywhere. It couldn’t be in the air around us if there weren’t enough room.
Work with a ventilated workspace when handling boards (vinyl) of this size. We should not get toxic chemicals into the area where our skin meets our vinyl wall before taking a break. We are going full steam ahead, except when we’re wearing old clothes, probably because they fit comfortably inside the newly purchased shoes.
Your truck-less board needs a fresh look. Put on gloves and protective glasses and place the top down—afterward, sand for 15 minutes with a 40 grit electric sander. In the next step, 150grit is applied, which takes 20 more minutes, resulting in a smoother surface. Follow these steps to finish the process. As you do so, be careful not to let the pressure pour out unevenly on the scratchboard.
You’ll have better-looking paintings, and the finishing will be more uniform once you have cleaned the board. Snow dust should be removed with a stiff bristle brush. In such a case, the surface might be damaged.
Bristles made of wire are not recommended. They can cause scratches that appear on painted surfaces later if applied regularly from different angles by other brushes in the application process or when hands are dirty during the painting process.
It works well to mix carpenter’s grade wood filling paste with 50% water. It has to be lightweight enough. Under pressure, there shouldn’t be too many bubbles. However, it should be strong enough to hold its shape when heated without expanding drastically.
The painter’s tape should now be applied to the sides and top of the board.
Step 2: How to use the primer
It would be best to use an aerosol primer for a professional look. Shake the spray well before applying and follow the primer instructions.
Then wait 30 minutes before adding a second coat, or else it will not be evenly applied in some areas while making others less attractive than before. When not used properly, there can still be toxic elements, which can, over time, damage the eyes. That is where eye protection comes into play.
By observing our general guidelines from above regarding safe cleaning supplies based on proper hygiene (handwashing/medical masks), let’s discuss what these tips look like in practice at home without introducing anything harmful.
Sand the primer completely before painting to remove clumps, bubbles, or blisters. For a second filing of the 150-grit paper, be firm but not too forceful, as this could cause inclusions to encroach on top of each other.
It would help if you always started small so that there is no residue left after brushing off dust onto an old lint or t-shirt, and then let it dry overnight while leaving the air out. This helps with the pressure getting intense towards the end of each pass, with grits ranging from 180 – 220 depending on whether you need a rough or smooth finish.
Before spraying, wipe the board’s bottom and prime the wood with an old cotton t-shirt. You don’t have to worry about residue on your masterpiece since this tack coat prevents paint defects by thinning the paint.
If you are doing this last step, you should be careful not to get any liquid cleaner on other parts of the project, as it may cause a mark. The brush strokes are too close when applying the product evenly across the surface area because of poor adhesion between layers during drying.
Step 3: Choosing the design
To make a custom skateboard, the deck must be painted. When you paint your stencils, the unpainted areas will form designs on them, and because this process requires patience, you can make mistakes.
Don’t forget to bring along plenty of paper towels and other objects that lend themselves to distressing, such as rags from previous projects! The next step is to combine geometric shapes for more detailed looks. Squares work well with triangles integrated horizontally and vertically. Starting skaters should use tape to create different types, such as straight lines.
Step 4: It’s time to paint the board.
Paint your base color onto the surface where you will be doing the stencil design. White and black are highly contrasting colors so that all other colors will stand out more as a result.
Spraying should be done correctly to be covered smoothly with a tacky quality similar to watercolor paint. A spray aerosol is the only way to accomplish this since it gives better finishing qualities.
You need to spray the second layer at least 12 inches away from where you want continuity in color. When using a stencil and tape between each letter and number, getting an even application can be challenging, but it becomes second nature with practice.
We recommend waiting at least 24 hours after applying the first two coats before adding anything on top; otherwise, your text will get splattered all over again when it comes up for the second time.
When the paint has completely dried, pull the tap from the board with steady and firm pressure. To do this, you need to tape up the tags so they can quickly come off with a piece of tape; stand one end at an angle so that it won’t damage the wood too much when it comes off.
Using 220-grit sandpaper (for final cleaning), you can create a smooth finish after removing all obstacles from both sides. Simply lightly sanding removes any roughness associated with the rough surface. You can then apply more time-consuming steps if necessary to ensure no residue remains, and then wipe clean using either old t-shirts or a rag, as your preference may dictate.
With the right equipment, it’s a breeze to get new-looking boards regardless of your favorite color. The only things you’ll need are some paint and brushes from your home or the hardware store nearby. For all skateboarders, this article explained how to paint the deck of a skateboard.
Leave a Reply